Introduction
Are you looking to remove speed limiter on Electric golf cart? But don’t know how to do it. Today in this article, we will discuss 5 methods that will help you remove speed limiter on electric golf cart.
You can increase the speed of your EV golf cart yourself by following the methods we will be discussing and can increase the speed limit by following the path that applies to your EV golf cart.
Follow the directions very well and you can safely exceed the speed limit without compromising the performance of your EV golf cart.
In this case, We will discuss all methods of adjustment of governor setting or speed controller installation method. So let’s discuss ways to remove speed limiter on electric golf cart.
Why Would You Want To Remove Speed Limiter on Electric Golf Cart?
Electric golf carts have speed restrictions for reckless driving and safety reasons. However some EV golf cart owners prefer faster speeds and more fun rides, especially where there are no speed restrictions, so they ignore these speed restrictions and use EV golf carts for recreational purposes.
But always remember this, removing the speed limit can void the warranty from the company. Besides, if proper procedure is not adopted, there is a danger of an accident. So it’s time to move the EV golf cart speed limit. Proper instructions must be followed and work must be done within certain safety nets.
Essential Tools
Electric golf cart requires some tools to remove speed limiter on Electric Golf cart. The tools are:
- Service Manual: Before starting the work, read the service manual of the golf cart and get an idea about its electrical parts, it will help to avoid mistakes.
- Screwdriver: Flathead and Phillips are two types of screwdrivers that are required. This will be used to open the panel and open the governor or speed controller.
- Wrench Set: 10 m.m and 11 m.m size wrench are required. This will serve to open the battery connection. Also, keep a complete set of nuts and bolts for emergency needs.
- Wire Cutter and Stripper: If a wire has to be cut to remove the speed limit, then a stripper and a wire cutter are needed.
- Multimeter: A multimeter is essential to check whether electrical apparatuses are working properly.
- Soldering Iron: Soldering iron is essential to make the joining work strong between two wires.
- Electric Tape: Electric tape is essential to cover the open argument with electric tape after its change. It protects from short circuits.
- Programming Kit: Golf cart speed controller settings require a programming kit.
- Safety Gear: Safety gear is required to protect against electric shock or other injuries. Such as gloves, protective glasses, etc.
How To Remove Speed Limiter On Electric Golf Cart
1. Adjusting Speed Controller
The controller controls the speed limiter of the Electric Golf Cart. By setting this controller properly, the speed of the EV Golf Cart can be changed or increased to the maximum speed. To do this, the procedure to be followed is:
- First identify the controller of the EV Golf Cart. It is usually located near the battery and under the seat.
- Â Then refer to the user manual to locate the speed controller adjustment screws or Potentiometers.
- Set the controller’s speed slowly with a small screwdriver or wrench. Turning it clockwise will increase the speed.
- After a small tune, Check the EV Golf Cart’s speed. It should be within safe and controllable limits.
- Repeat the process until the golf cart reaches your desired speed.
However, always remember, to take safety caution, and maintain the speed balance between speed and controller.
2. Upgrading the Motor
Remove speed limiter on Electric golf cart can also be increased by upgrading its motor. A more powerful motor can deliver more torque and speed. So the steps to follow to upgrade the motor are:
- Select a motor that is compatible with your EV golf cart and that will support power output, voltage, and electrical accessories. If needed, take the help of the user manual guide.
- Disconnect the battery and remove the existing motor.
- Replace the new motor with protection and install it in the same place.
- Reconnect the battery and check the speed limiter of the golf cart.
- If the speed value is not to your liking, fine-tune the motor. Rotate clockwise while tuning.
Remember, Upgrading the golf cart speed limiter is a complex process, so keep a few things in mind when doing it, such as, the electrical parts of the new motor golf cart are comparable. Follow all the safety procedures during installation and start working only then.
3. Changing The Gear Ratio
The gear ratio plays an important role to remove speed limiter on Electric golf cart. Changing the gear ratio can increase the speed limit. So follow the below-mentioned steps carefully :
- Get the help of the user’s manual to determine the gear ratio of the golf cart. There has been mentioned the exact proportional gear ratio.
- Purchase different ratio gears which are to match your EV golf cart.
- Disconnect the electrical connection from the battery, open the rear axle, and remove the gearbox.
- Install the new gear in place of the old gear and reconnect all connections.
- Check the speed of the golf cart again by reconnecting the battery.
- Adjust the gear ratio and consult a mechanic to optimize the speed.
The proportional change in gear has a significant effect on the golf cart’s speed limiter and acceleration. So it is very important to select the appropriate gear and replace it properly.
4. Installing Performance Chip
You can to remove speed limiter on Electric golf cart by installing a performance chip. The chip modifies the golf cart’s Electronic Control Unit (ECU) to increase power output, speed, and performance. Let’s see how the chip is installed:
- First determine which chip is compatible with your electric golf cart model. Ensure it has a speed limiter tuning facility and is compatible with your golf cart.
- Locate the ECU on the golf cart with the battery connection off. Usually, it is found under the seat or near the controller.
- Remove the ECU and install the new chip. Ensure all connections are in their original state.
- Test the speed of the golf cart by adding the battery connection.
- Adjust the settings of the chip so that the golf cart gets its maximum speed.
After installing the performance chip, the speed of the golf cart will increase. But installing the right and reputed branded chip is very important. Follow the user manual guide if necessary.
5. Replacing Speed Controller
You can increase the speed limiter of the golf cart by upgrading the speed controller. Here are the steps to follow to upgrade it:
- Select a controller that is compatible with the power output and electrical system of your golf cart.
- Disconnect the battery and locate the controller, it is located under the seat.
- Remove the old controller, install the new one, and reconnect the remaining connections.
- Take a test drive of the golf cart by connecting the battery.
- Tune the controller if it require. For safety purposes, consult the user’s manual guide or an experienced professional.
The controller increases both the speed and acceleration of the golf cart. So choose the correct controller model compatible with your golf cart and avoid any danger.
Additional Tips for Maintaining Your Electric Golf Cart
After increasing the speed limiter of the golf cart, it is very important to maintain it properly. you can follow the below-mention steps :
- Clean the golf cart daily. especially clean dust from its electrical components, speed control, and batteries.
- Â Check the battery charge level. Always charge when there is a 30% remaining charge.
- All electrical connections and cables should be in good condition. Loose connections can affect the golf cart’s performance.
- Check the tire pressure regularly, also check the lubricating parts and brake system once a month.
- If the golf cart slows down or the battery drains quickly, contact a service center immediately.
The tips discussed above can give your electric golf cart a better and smoother ride.
Speed Adjustment -Different Model Golf Cart
1. Club Car
Top Model: President, Onward, DS
Club car models have specific handheld devices or company programmers to access controller settings that control this function. Controller settings include speed setting, acceleration setting, and brake setting.
2. E-Z-GO
Top Model: TXT, RXV, Express
Programming is done by connecting the E-Z-GO model gold cart controller setting to the port. Also, speed setting and diagnostic checks are done in the same way. E-Z-GO model uses Curtis brand for the controller which needs to be reprogrammed to set again.
3. Yamaha
Top Model: The Drive (G29) Drive 2
Yamaha golf carts use their controller YDRE model which requires a handheld programmer to make speed adjustments or acceleration.
4. Garia
Top Model: Garia Golf Car, Garia Via
Garia golf cart models require dealers for speed controllers of their golf cart.
5. Star EV
Top Model: Classic, Sport, Sirius
Speed ​​and acceleration in Star EV carts are controlled through programming devices. Its speed adjustment requires an experienced technician.
Conclusion
The acceleration of the electric golf cart makes for a fun and thrilling experience. In this article, we have discussed the 5 easiest ways to increase the speed limiter on electric golf cart and each method has its advantages and disadvantages.
But remember, even if the speed limiter is increased, golf cart control and safety should be the highest priority. So consult an experienced person if necessary to determine the speed limit so that the golf cart can reach its maximum speed by adopting the correct method.
So, what are you waiting for, enjoy the fun of fast riding by removing the speed limiter of the golf cart.
Happy riding!
FAQs
1. Removing The Speed Limiter Can Damage My Golf Cart?
Yes, exceeding the speed limit of a golf cart can cause damage. Every golf cart company designs each golf cart to a certain limit so that its maximum speed does not damage any of the electrical and mechanical parts of the golf cart. However increasing the speed limit of the golf cart puts a load on the cart’s batteries, tires, and other parts.
2. Remove Speed Limit On Electric Golf Cart is Legal or Not ?
The validity of golf carts is country-specific On law and environment. Some countries require permission to exceed the speed limit of golf carts. But in the process of increasing the speed, the safety and security of the golf cart is the first priority.
3. How To Remove Governor On Golf Cart?
Removing the governor on the golf cart to increase the speed may void the warranty and is not safe for golf carts:
- Select the governor next to the throttle. It is located near the engine.
- Remove the cover panel.
- Open the throttle using a GP tie or wire.
- Check that the golf cart is working properly.
Note: This may result in engine damage or accidents.
Pingback: Royal EV Golf Cart Problems|5 Essential Troubleshooting Guide